ALL-5 Barrel AC
ALL-5 electrical grease pumps are manufactured for lubrication purpose only. Pump displacement is variable to provide required lubrication needs. Pump system doesn’t have a lubricant reservoir. Standard grease barrels can be used as reservoir. Pump systems plunge lenght can be manufactured for diferent barrel volumes. ALL-5 pumps are manufactured with 3 different sizes of grease piston option. Each piston delivers different amount of grese and pressure value to pump outlet. ALL-5 pumps can be selected from 2 principle options which is working with pressure switch or by-pass sysem.
CAUTION : ALL5 pumps are manufactured for lubrication purpose only, for this reason it is not suitable to operate the pump more than 5 minutes.
|Motor type||:||380 V AC|
|Maximum pressure||:||200 bar.|
|Motor protection class||:||IP 54|
|Grease class||:||NLGI 00 (-10°C to 0°C)
NLGI 0 (0°C to 10°C)
NLGI 1 (10°C to 30°C)
|Pump displacement||:||(Ø12 piston) 160 cm³/minute
(Ø16 piston) 280 cm³/minute
(Ø20 piston) 445 cm³/minute
|Working temperature||:||-25°C to 80°C|
|Reservoir capacity||:||No Reservoir.
(Standard grease barrels can be used as a reservoir.)
|Product number||Voltage||Grease packing||Piston size||System|
|10 38 20 E1||380 V AC||16 - 20 liters bucket||Ø12||Standard|
|10 38 20 E2||380 V AC||16 - 20 liters bucket||Ø16||Standard|
|10 38 20 E3||380 V AC||16 - 20 liters bucket||Ø20||Standard|
|10 38 20 B1||380 V AC||16 - 20 liters bucket||Ø12||By-pass|
|10 38 20 B2||380 V AC||16 - 20 liters bucket||Ø16||By-pass|
|10 38 20 B3||380 V AC||16 - 20 liters bucket||Ø20||By-pass|
» Pumps are made for lubrication purposes only and cannot run continiously over 2 hours. Using continiously at maximum pressure might harm the system.
» Washing with pressurized water is not allowed.
» The grease used in the pump should be same as the grease types specified to the model of pump.
» The grease should be Litium based and with EP additive. Pumps can use NLGI 0, 1 and 2 greases. In cold weather NLGI 0 or 1 and warm weather NLGI 2 should be used.
» The grease used should be absolutely clean and all contamination during bucket change should be avoided.
» Contamination during the filling causes damages to pump, piston and distributors.
» Instructions how to install the pump to a bucket are in operations manual which can be downloaded from SUPPORT menu.