ALL-5 Oil AC
ALL-5 electrical oil pumps are manufactured for lubrication purpose only. Pump system doesn’t have lubricant reservoir. Standard lubricant packing buckets or barrels can be used as reservoir. Pump systems plunge lenght can be manufactured for diferent volumes.
CAUTION : ALL5 pumps are manufactured for lubrication purpose only, for this reason it is not suitable to operate the pump more than 5 minutes.
|Motor type||:||380 V AC|
|Working pressure / Max. pressure||:||20 bar.
|Motor protection class||:||IP 54|
|Pump displacement||:||2,5 liter / minute|
|Working temperature||:||-25°C to 80°C|
|Reservoir capacity||:||No Reservoir.
(Standard lubricant packages can be used as a reservoir.)
|Product number||Voltage||Grease packing||System|
|10 38 20 S1||380 V AC||Barrel type||Standard|
|10 38 16 S1||380 V AC||Bucket type||Standard|
» Pumps are made for lubrication purposes only and cannot run continiously over 2 hours. Using continiously at maximum pressure might harm the system.
» Washing with pressurized water is not allowed.
» The grease used in the pump should be same as the grease types specified to the model of pump.
» The grease should be Litium based and with EP additive. Pumps can use NLGI 0, 1 and 2 greases. In cold weather NLGI 0 or 1 and in warm weather NLGI 2 should be used.
» The grease used should be absolutely clean and all contamination during bucket change should be avoided.
» Contamination during the filling causes damages to pump, piston and distributors.
» Instructions how to install the pump to a bucket are in operations manual which can be downloaded from SUPPORT menu.